Can A Clogged Toilet Cause Low Water Pressure?

If you have been dealing with the issue of a clogged toilet, you’ll be interested to know the real cause. Many people seem to mistake the symptoms for the actual cause of the problem. They believe that a toilet clog is causing low water pressure. But, in most cases, the truth of the matter is that low water pressure is the cause of the clog.

The reason for this is simple enough to explain. You may suddenly come down with a toilet that clogs up and has a hard time flushing. At some point, it may refuse to flush at all. If this is the case, you may make the mistake of introducing a whole lot of chemical solutions, such as synthetic drain cleaners, into the mix.

However, the best way to solve this issue will also be the very simplest. Instead of pouring a ton of chemicals down your toilet, it may be better to strike right at the heart of the problem. The real issue here is more than likely low water pressure. The best way to fix the issue will therefore be to introduce more water into the equation.

What you should do at this point is pour an extra gallon of water down into your toilet. At this point, there should be enough water pressure for your toilet to flush. The act of flushing should also be enough to remove whatever excess matter may have been a secondary issue. The less pressure you have, the more water you should add.

Why Do I Lose Water Pressure When I Flush The Toilet?

The toilet in your home, as well as the ones in all the homes in your neighborhood, are connected to the main water line in your area. This means that if there should be a problem in the main line, you will naturally develop a problem with your own toilet. This means that you will have to solve the problem by yourself once you discover it.

It will very likely take some time for the county to fix their own water pressure issue. But you can anticipate them by taking a few measures on your own. Try adding an extra gallon of water to your toilet, then flushing it. If it flushes successfully, you can keep doing this until the main water line is fixed by the county authorities.

It’s also important to recognize that the problem may be coming from your own toilet. Turn on your sink and leave the tap running, then flush your toilet. If the water pressure in your sink goes down, it’s safe to conclude that the problem is with your toilet. It’s time to replace your toilet or call in plumbers to check your pipes.

How Do You Fix Low Water Pressure In Toilet?

There are a number of methods that you can make use of in order to fix low water pressure in your toilet. The first and most common way is to add an extra gallon of water to your toilet. If your toilet then flushes successfully, you can conclude that the cause of your low water pressure has been removed. Try this method several times.

You may also wish to check that the water valve for your toilet is turned on in the correct fashion. This valve will usually be located on the wall just behind your toilet. Check to see that this valve is turned on all the way. If it looks stuck or has been turned down, you may need to use a wrench to get it turned up correctly.

Another method of getting your water pressure back up to speed is to make the proper adjustment to the float that is located inside the tank of your toilet. You should first make sure that there is enough water in the tank. If the level seems low, pour a gallon of water directly into the tank. This will help when you adjust the float.

The total level of water in your toilet tank should be sitting roughly an inch below the overflow tube. You can now adjust the float to make sure that it will do its job in the proper fashion. If it fails to do so after several attempts, you may need to go to the local hardware store to buy a new one. You can also order one from the web.

How Do You Increase Your Water Pressure In Your House?

The first thing you should do is the old tried and true water adding trick. Just add a gallon or so of water to your toilet before you flush it. This should be enough to restore enough water pressure for at least one flush. But if this trick only works for a single flush, you may have to take other measures to find a more permanent solution.

If your house is connected to the city water line, it’s a good idea for you to call the municipal water department. The idea here will be to get them to check the water pressure that comes in from the street to your home. There should be no charge for them to perform this function. A check will usually result in a quick improvement.

You may also wish to hire a plumber to install a water pressure booster pump. This is a specially designed electric pump that can be attached to the water supply line in your home. The idea is to give your pressure a major boost that will get it back up to the desired level. The cost for such a pump will vary between $100 and $700.

One of the simplest things you can do is adjust the water valve behind your toilet. If it seems to be turned off or adjusted too low, push it back up to full. If this doesn’t work, it’s time for you to call in a plumbing service.