The average mold bomb can cover an area of up to 6000 cubic feet. This is equivalent to the space of a room about 25×25 feet or 600 to 700 square feet. Of course, the exact amount of coverage you will receive will depend on the brand of mold fogger that you are buying. The above quoted figure is the industry average.
The average of 600 square feet per can of mold fogger was calculated on a number of factors. Chief among them is the industry standard in such matters. It needs to be kept in mind that makers of mold fogger formulas are expected to adhere to strict state and Federal regulations that govern the concentration of their products.
The formula is manufactured to be strong enough to kill mold on contact at the right concentration. 600 square feet is thus considered the safe median for this type of formula to cover. This is due to the fact that a high level of protection is required for people who come into contact with the formula as it is being employed.
How Many Mold Foggers Do You Need for an Average Sized House or Apartment?
The exact number of mold foggers that you will need for your home or apartment will depend on a number of factors. If you live in a small to average sized house, one can of fogger per floor should do the trick. You may only have a mold issue in one particular area of your home, such as the basement.
If you live in an apartment of average size, you should probably only need one can of fogger. This will be especially true if your apartment is 600 square feet or less in extent. If you happen to live in a larger apartment or condo, you may need 2 cans, depending on how severe the mold issue is in other parts of your dwelling.
- 900 square feet – 2 cans
- 1200 square feet – 2 cans
- 1500 square feet – 3 cans
- 2000 square feet – 4 cans
- 2500 square feet – 5 cans
How Big of a Room Will One Can Cover?
One can of mold fogger will normally cover an area of up to 600 square feet. This will normally be enough to cover the needs of a particular room in your home. If you have larger open spaces in your home, you may need to consider using multiple cans of mold fogger. In most cases, an extra can should more than cover the area in question.
If the room is very wide or lengthy, such as a ballroom, you may need to use 2 or 3 cans to cover the entire area. You should set them to work and then vacate the area immediately. It may take a full day or two to completely air out. This will be all the more true if you find yourself in a position where multiple foggers must be employed.
Will Mold Fogger Work in a 30ft Sailboat?
In most cases, a single can of mold fogger should be sufficient to cover a 30 foot sailboat. If it turns out that the top and bottom areas must be treated, you can use an additional can. Sailboats are positioned differently when it comes to floor space than a home or apartment, so some discretion and strategic adjustment may be needed.
What this chiefly means is that you will need to go about using a mold fogger in a slightly different manner than you would for an apartment or house. Once you set the fogger, you need to vacate the boat immediately. Since the boat is set up in a different arrangement, it may take longer to air out than a normal home would.
Can it Be Used in a Car?
A can of mold fogger can certainly be used to take care of any mold growth issues that may exist in your car, truck, or other vehicle. In all but the most severe cases, one can will be more than sufficient to cover the job. Your car or other vehicle is a more restricted area than your home or apartment, so no overkill is necessary here.
You will need to allow for your vehicle to air out and fully recover from the use of a strong mold fogger. It may a day or two for it to recover completely so that it is safe to be in while driving or riding.
You can set your fogger to the mildest possible setting so as not to render the vehicle too toxic to inhabit in a short time. This will help to lessen the amount of time it takes for the toxic effects to dissipate.
Can I Use This Mold Bomb Underneath My Mobile Home and if So Do My Pets and I Have to Leave the Home?
You can use a mold fogger to take care of any mold that may be detected growing under your mobile home. However, this is a case where you will need to proceed with a due amount of caution. It can certainly be a bit tricky to treat the underside of a home, whether mobile or stationary, with a mold fogger in the conventional manner.
For one thing, it may take up to a full day for the effects of the fogger to wear off. There is also the fact that you will definitely need to vacate the structure and take your kids and pets with you. This is not an area that you want to be anywhere near while the fogger is doing its job. The fumes will prove toxic to you and your family.
There is also the welfare of your neighbors to consider. If your mobile home is in a position that is very near the property of another person, you need to get their permission to employ this method. If they agree, you can go ahead and do it. If not, you may need to find another means of handling any severe mold issue that may exist.
